Replacing the document scanning array lamp
NOTE: The Document Scanning Array is an optional accessory which is available only when using a Scanner 923. If your Scanner does not have a DSA, proceed to the next section.
The Document Scanning Array lamp should be replaced whenever a message appears in the Status Display which indicates that the lamp needs to be replaced.
1.Turn the side panel switch off.
2.Open the front cover.
3.Locate the Document Scanning Array.
Document Scanning
Array
Release Handle | Release Handle |
4.Push down and rotate the release handles outward to release the DSA assembly.
Mounting Brackets
Transport Area
| 8 - 13 |
