5-19
A-41069 January 1993
F59 Endorser Print Position
Allows you to specify how far from the leading edge of the document (fed
into the transport first) the endorsement will appear.
The default print position, defined during installation, is used as the base
value. The use of inches or millimeters depends upon the measurement
system specified during installation.
FFF.003.002.001 Mode 10
Endorser Print Position: .250 (in) <-->
• Press the up arrow key to increment the starting print position by
one (1) inch [25 mm]; or
Press the down arrow key to decrement the starting print position by
one (1) inch [25 mm]; or
Press the right arrow key to increment the starting print position by
one-eigth (0.125) inch [3 mm]; or
Press the left arrow key to decrement the starting print position by
one-eight (0.125) inch [3 mm].
• Press the Enter key.
F60 Bar Code Reading On/Off
Allows you to turn the bar code reader on or off.
NOTE: If function code F60 is used to turn bar code reading off, partial bar
code reading is also turned off.
FFF.003.002.001 Mode 10
Front Bar Code Reading ON 0=OFF
• Enter the number zero (0) to turn the bar code reader OFF.
• Press the Enter key.
FFF.003.002.001 Mode 10
Front Bar Code Reading OFF 1=ON
• Enter the number one (1) to turn the bar code reader ON.
• Press the Enter key.