3 - 5
A-41069 January 1993
5. Turn the Gap Adjustment Knob clockwise thr ee complete turns to
open the gap between the feed and separator rollers.
6. Select two documents of the same size, textu re and thickness,
similar to the types of documents you will be processing.
7. Place one document on top of the other. Ho ld them firmly by their
trailing edges. Insert them into the gap a pproximately 0.125 (1/8)
inch (3 mm).
If the documents separate, repeat the followin g steps until the
documents do not separate:
a. Turn the Gap Adjustment Knob clockwise o ne-half (1/2) turn.
b. Insert the documents again.
If the documents do not separate, proceed wi th Step 8.
8. Rotate the Gap Adjustment Knob counterclock wise one or two
clicks.
9. Hold the trailing edges of the documents fir mly. Insert them into the
gap.
If the bottom document is not separating from the top document,
remove the documents and repeat Steps 8 and 9 until the bottom
document separates from the top document.
If the bottom document is separating from th e top document,
proceed with Step 10.