Kodak A-41069 user manual Operator Messages, Users System administrators

6 OPERATOR MESSAGES

Users

System administrators

The following section outlines the actions which should be taken by the users and system administrators when an operator message appears in the status display.

If a message appears in the Status Display which is within the ranges E000-E299 or E500-E599, you should take the action indicated in the table(s) which appear in this section.

IMPORTANT: Never power down the machine without first contacting your System Administrator.

If a message appears in the Status Display which is within the ranges E300-E499 or E600-E999, you should contact your System Administrator.

If a message appears in the Status Display which is within the ranges E300-E499 or E600-E999, you should be contacted by the operator.

The following action(s) should be taken:

•Determine whether or not the error can be addressed from the hosT system.

•If the error cannot be addressed from the host system, attempt to clear the error by taking the action indicated in the table(s) which appear in this section.

•If the prescribed action(s) do not clear the error, initiate a controlled power-down sequence:

-Wait for all information currently held in the buffer to be transferred to the host system.

-Turn off the Scanner transport using the side panel switch.

-Turn off the Scanner power using the main power switch.

-Wait 10 - 30 seconds.

-Turn on the Scanner power using the main power switch.

-Turn on the Scanner transport using the side panel switch.

•If the error condition is not cleared using the controlled power-down sequence, contact service.

A-41069 January 1993 6-1