3 - 9
A-41069 January 1993
Adjusting the exit
hopper side guides and
end stop
The Exit Hopper Side Guides and End Stop m ust be adjusted so that
documents will be stacked properly after p rocessing.
1. Adjust the Side Guides on the Exit Hopper to match the adjustment
of the Side Guides on the Feed Shelf.
2. Adjust the End Stop of the Exit Hopper by de termining the longest
document to be processed. Slide the End St op until the Arrows
point to where the length of the longest d ocument is shown on the
Exit Hopper Label.