Connecting the power When the drivers have been installed, connect the power supply and

cord to the scanner power cord to the scanner. Make sure that the power outlet is located within 1.52 metres (5 feet) of the scanner and is easily accessible.

1.Select the appropriate AC power cord for your region from the supply of power cords packed with your scanner.

NOTE: The power cord for the United States/Canada and China look very similar. The difference is the United States/ Canadian power cord has holes in the prongs, and the Chinese power cord does not.

United States

and Canada

China power cord

2. Attach the power cord for your power type to the power supply.

3.Plug the output power cord from the power supply into the power port on the scanner.

4. Plug the other end of the power cord into the wall outlet.

12

A-61512 May 2006

Page 15
Image 15
Kodak i30 / i40 manual United States Canada China power cord