Kodak i30 / i40 manual Installing the Kodak Driver Software, Select Install Scanner Software

Installing the Kodak Driver Software

Attaching the output tray and special document feeder

1.Locate the output tray holes on the scanner.

2.Insert the pin on the left side of the output tray/special document feeder in the hole, then press the ribbed button on the right side of the output tray/special document feeder and insert the pin in the hole on the right side of the scanner.

Install the driver software before connecting the scanner to your PC.

1.Insert the Kodak i30/i40 Scanner Installation CD in the CD-ROM drive. The installation program starts automatically.

NOTE: If the CD does not start automatically, open the My Computer icon on your desktop. Double-click the icon for your CD-ROM drive, then double-click on Setup.exe.

2.Select Install Scanner Software.

3.The Kodak i30/i40 Scanner Installation window will be displayed.

8 A-61512 May 2006