•Aggressive: selecting this option will eliminate any residual black border on any image edges. In order to achieve this, there is a possibility that a small amount of image data from the edge of the document may be lost
•Fixed to Transport: (used for batches of
•Relative to Document: (zone processing): (used for batches of
This option may be used in conjunction with Automatic cropping where a separate color/grayscale or binary area to be saved is desired. It is useful in applications where a photograph, signature, embossment or seal appears in a consistent area for an application (you may want that small area in color/grayscale and the rest in binary).
To define a zone, select Area to display the Scan Area dialog b box. See the section entitled, “Defining the Scan area” later in this chapter for more information.
NOTE: You can scan documents longer than 35.56 cm (14 in.) and less than 86.36 cm (34 in.) when the host PC is configured with adequate memory (see “System requirements” for more information).
Page size and layout The default paper size is set when a scanner is first selected. You can choose a different paper size using the
NOTE: The Page Size and Page Layout selections also appear on the Scan Area dialog box. If you make a change on the Scanner Settings dialog box, the same selections will appear on the Scan Area dialog box and vice versa.
The Page Layout area allows you to select either Portrait or Landscape.
•Portrait will display the image orientation in the shape of a conventional portrait, where height is greater than width.
•Landscape will display the image orientation in the shape of a conventional landscape painting, where width is greater than height.
56 |
|
