Cleaning the calibration area

1.Remove dust and debris from this area by using a Staticide wipe or a small brush. Be careful not to scratch the glass when cleaning.

IMPORTANT: Staticide wipes contain isopropanol which can cause eye irritation and dry skin. Wash your hands with soap and water after performing maintenance procedures. Refer to the MSDS for more information.

2.Wipe the upper and lower calibration area again with an almost-dry Staticide wipe to remove any streaks.

3.When finished, close the scanner cover.

68

A-61512 May 2006

Page 71
Image 71
Kodak i30 / i40 manual Cleaning the calibration area