Connecting the USB | IMPORTANT: If you have not installed the Kodak Driver Software, |
cable | do that now before proceeding. |
| The following instructions explain the connection of the USB cable |
| between your scanner and PC. You need to identify the USB port on |
| your PC. If you installed the USB 2.0 card, use that port, otherwise use |
| the USB port on your PC. |
| The USB cable supplied with your scanner has two different ends. |
A
B
Turning on the scanner and finalizing Kodak Driver Software installation
1.Attach the B end of the USB cable to the scanner USB port, located on the back of the scanner.
2.Attach the A end of the USB cable to the proper USB port on your PC.
NOTE: If you installed a USB card, use one of those ports, or use your PC’s USB port. See your PC manufacturer’s documentation for the location of the USB port.
When the USB cable and power connections have been made, and the Kodak Software Drivers have been properly installed, the installation will be complete when the scanner is turned on.
13 |
