Kodak i30 / i40 manual Scanner Control, Dialog box, Multi-Feed Detection, Options

Scanner Control	Selecting the Scanner Control button on the More Scanner Settings
dialog box	dialog box displays the Scanner Control dialog box.

	This dialog box allows you to set multi-feed detection, transport control,
	enable/disable lamp saver and set the programmable key functions.
	The settings in this dialog box do not effect the quality of the image.
	See the section entitled, “Setting scanner controls” later in this chapter.
	OK  saves the values set on the dialog box.
	Cancel  closes the dialog box without saving any changes.
Multi-Feed Detection	Length Detection  this option can be enabled or disabled. The
options	default is disabled. If Length Detection is enabled, enter the maximum
	length. This is the minimum length of the document that can be
	scanned with a multi-feed being detected. Length detection is used
	when scanning same-sized documents to check for overlap. For
	example, if you are scanning 8.5 x 11-inch (A4) documents in portrait
	mode, you may want to enter a value of 11.25 inches (28.57 cm) in the
	Maximum Length field. The maximum value is 13.99 inches (35.56 cm).
	Units — defines the primary measurement system. Pixels, Inches,
	and Centimeters are available.
	Auto Set  when enabled, will automatically set the maximum length
	value to .50-inch (1.27 cm) greater than the length of the currently
	selected page size.
	Sound — select this option to choose the sound you would like your
	PC to make to alert you of a multifeed.
	To choose a sound:
	1. Click on the Sound button to display the Open dialog box.
	2. Choose the desired .wav file.
	3. Click Open on the dialog box and the sound will be saved.

A-61512 May 2006 63