•Relative to Document: (zone processing): (used for batches of same-sized documents) — zone processing is a floating fixed crop window (the zone) located relative to the upper left corner of a document. It allows you to select an area on the document to be delivered in either color/grayscale or bi-tonal format (a separate window for both bi-tonal and color/grayscale may be defined). Different parameters may be selected for both the front and rear of the image.
This option may be used in conjunction with Automatic cropping where a separate color/grayscale or bi-tonal area to be saved is desired. It is useful in applications where a photograph, signature, embossment or seal appears in a consistent area for an application (you may want that small area in color/grayscale and the rest in bi- tonal).
•Fixed to Transport: (used for batches of same-sized documents) allows you to define the area or zone to be imaged. If you select this option, enter the x and y offset values, width and length. You can enter the desired values in the fields or use the arrow keys to define the desired area. The Display window will show image placement as you change the values.
The following options are only available when Fixed to Transport or Relative to Document is selected.
-X-Offset the distance from the left end of the scanner to the left edge of the scanning area.
-Y-Offset— the position from the top end of the document to the top end of the scanning area.
-Width — the width of the scanning area.
-Length — the length of the scanning area.
-Center Frame automatically calculates the x-offset for center- fed feeding based upon document size selected.
-Rotate Frame automatically calculates the offset values based upon feed orientation of the document size selected (landscape vs. portrait).
NOTE: You can scan documents longer than 35.56 cm (14 in.) and less than 86.36 cm (34 in.) when the host PC is configured with adequate memory (see “System requirements” for more information).
