Printing File Prints with Preview | Kodak RP 30 manual

Production

Printing File Prints with Preview

With preview active, a large number of functions are offered for image correction and image enhancement. The edited images can be saved on data carriers.

1.Touch Start print.

Up to four images are shown at the same time. The corrections of the selected configuration are taken into consideration. You can modify these corrections for each individual image in the display. Information about the current configuration is shown on the side of the buttons.

Because of capacity limitations, the images in the display have many fewer pixels than the print will have. Lack of sharpness is therefore difficult to discover in the preview.

The preview continues automatically at the preset speed. If the active image (on the extreme right) advances without operator action, it is printed with the preset configuration.

2.If necessary, stop the automatic cycle by touching Stop, and edit the active image.

3.Touch Enlarged view on.

The current frame is shown twice for comparison:

•Original (small)

•Edited version (enlarged)

If there are modifications, the display is refreshed with the function Image editing or Special.

4.Touch Rotate display.

To show an enlarged picture upright (always by 90° cw).

5.Enlarged view off returns to the normal view of the four images.

The same buttons are offered in the view of four images and the enlarged view:

•Change PpF

Change the number of prints per frame.

•Image editing and Specially

Also see Image Editing and Specially in All Print Modes with Preview below.

•Hold

All corrections, etc.—except the enlarged view—are kept for all other prints of the order up to the next modification.

•Print & Stop

The current frame is printed. It remains marked so that other modifications and further prints can be made.

KODAK PROFESSIONAL RP 30 Laser Printer

6-21

Image 165

Kodak RP 30 manual Printing File Prints with Preview

Contents

Laserprinter Operator’s Guide Kodak Professional RP 30 Laser Printer Page Table of Contents Production Maintenance Contents Regulatory and Safety Information Electrical Hazard Symbol Hot Surface SymbolRegulatory Compliance EMC Compliance CE Compliance Mechanical Hazard Symbol Laser Compliance and Safety Operator’s Guide Laser Source Label Locations of Laser Safety Labels General Precautions Safety PrecautionsWhen Operating the Equipment When Disposing of the Equipment Disposal of Chemicals and Containers Handling of Processing Chemicals General Guidelines Safety Precautions for the Handling of ChemicalsSkin and Eye Protection Storage and Disposal Warranty Period Warranty InformationWarranty Repair Coverage How to Obtain Service Limitations Introduction Operator’s Guide Kodak Professional RP 30 Laser Printer Structure Using the DocumentationText Styles Indicates the potential for damage to or from the equipment Consumable Storage Requirements Storage of Chemicals and Paper Overview Info Printer Info Paper Processor Components Operator’s Guide Image Editing Product Description Functional Procedure Printing SequenceMain Computer Paper Processor Printer Sorter Densitometer Automatic Switch-On Switching On the Equipment Manual Switch-On User Login System StartReadiness for Operation Start Screen End of Work Changing UsersTouch Change user Automatic Shutdown Shutting Down Next Login Change TimerManual Shutdown Touch Shutdown Switching Off the Machine Partially Sleep Mode Button and Lamp on the Main Computer Operating Controls Keyboard and Mouse Touch-screen Monitor Screen Structure Information Area Operator’s Guide Drop-down Menus Touch-sensitive Buttons Pop-up Windows Overview Input Screen Menu Bar Numeric Keypad Main Menus Menu Overview Print Mode Menu Settings Menu without Machine Settings Settings Menu with Machine Settings Test Menu End of Work Menu Status Information / Help Menus Additional Screens Info Info Printer Info Paper Processor Info Order Version Info Error List Help Error Help IndexHelp Index Documentation Chemicals Operator’s Guide Kodak Professional RP 30 Laser Printer Preparation of Chemicals Cold water after each preparation of a solution Rinsing the TanksFollowing order Mixing the Tank Solutions Inserting the Chemical Filters Bleach-FixDeveloper Preparing Replenisher Tank Temperature ºC Other Operations to be Performed Prior to Production Start See Paper Processor Settings in Chapter Preparation of the Print Configuration Settings Machine SettingsFrom the Order Receipt to the Finished Print When to Save Settings From the Order Receipt to the Finished Print Administrator Operator Preparation of the Print Configuration Pfdf Enter paper Flie print Page Adjust shorter Recover settings Settings Entering Names Entering Numbers Types of Settings Machine SettingsSettings Machine settings Configuration Surface and Paper settings Set date/time Other settings Install SoftwareMachine Production balance Defining Surfaces Settings Machine settings Surface New Select Pfdf surface Settings Machine settings Paper settings Defining Paper Settings Operator’s Guide Coding the Paper Magazine Paper Width Width Indicators Surface Indicators Defining Cut Lengths Settings Machine settings Cut length User Interface Settings Machine settings User manager User Administrator Defining Users and User Rights − Password, Repeat − Edit− Language, Keyboard, Preview frequency, Beep touch − User rights ConfigurationsRights Button Description Preview Startup Defining the Start Time / Standard User Timer Calendar Defining Off Days Settings Machine settings Startup Edit calendar Settings Machine settings Install software Installing the Software Printer Settings Settings Machine settings PP replenishment Paper Processor Settings Production Balance Digital Settings Machine settings Productions Balance Digital Settings Impact Shifting towards + Sharpness of EdgesSharpening Soft-focus effect Fine structuring Sharpness of GrainUnsharpness Detail Contrast Settings Machine settings Network orders Digital Order SettingsRemote Order File Print Resource name Remote Order Autosave Computer nameAutomatic printing On/Off Address or name Name or IP address Other Settings DTFS Preselection Max. PpF Settings Print configurations Print Configurations Paper Backprint Correction AutoSave Front print Order Creating, Editing, and Deleting Configurations Creating a New ConfigurationCreating a New Configuration Based on an Existing One Deleting a Configuration Editing a Configuration Paper Configurations Creating a Paper ConfigurationSettings Print configurations Paper New or Edit Touch Save or Save as Select from the Paper Settings and the Paper Surfaces Backprint Configurations Select Save or Save as Operator’s Guide Settings Print configurations Corrections New or Edit Correction Configurations Operator’s Guide Settings Print configurations Autosave New or Edit Autosave Configurations Autosave fixed File format DriveQuantity Autosave quality File format Resolution CD, Internet Upload, Normal Resolution and File format as in Autosave quality Front Print Configurations Select Save or Save as Order Configurations Single PackageReproduction Creating a Single Configuration Specify Paper configuration and Cut lengthSelect Film mask File print Set the Configuration type to Package Creating a Package ConfigurationSelect Configurations Select Film mask and Film type Reproduction Black-and-White and Sepia Prints Configuration Types in the Order Configuration List Defining a Configuration as the Standard Configuration When to Save Settings Saving and Loading Settings and ConfigurationsProcedure Settings Save settings Settings Load settings Load Settings Tests Operator’s Guide Kodak Professional RP 30 Laser Printer Introduction Printer TestsOverview Prerequisites for MBL and PBL Calibration Printing a PBL TestTest Start PBL PBL Test with Laser Point Test Start MBL Printing an MBL Test See Save/Load Settings and Configurations in , Settings Daily Calibration Without the MBL Daily Calibration With the MBL Completion of the New Calibration Calibration of New Paper, Emulsion Changes Master Paper Testing the Paper Processor Test Control strip Chemical control strip Operator’s Guide Kodak Professional RP 30 Laser Printer Production Operator-Controlled Start Preparing the Paper Magazine Preparing the Equipment for Different Orders Operator’s Guide Important Avoid fogging of the leading paper edge Putting Paper in the Magazine Chapter Paper Widths Not Yet Coded Changing the Paper Magazine Order Number Automatic / Manual Order ProcessingManual Order Number Automatic Order Number End of Order Automatic / Manual Print Modes Prerequisites Printing File Print DTFS Single or Package Selecting the Configuration Type for an Order Using Autosave to Save Processed Images without Printing ReproductionBlack-and-White or Sepia Prints Changing the Configuration and the Order Number Changing the Current ConfigurationWith Change Config Selecting a Different Configuration Under Machine settings / Other settingsChanging the Order Number Touch Start print or Save order Loading Image Files from Data Carriers Saving Digital Orders Loading Saved Digital OrdersTouch Save order Touch Start print Printing File Prints without PreviewTouch Finish order Touch Prepare order Printing File Prints with Preview Image Editing and Special in All Print Modes with Preview Image Improvement Special TextTouch Enter text Touch Format text. a new screen opens Select File format, Resolution, and the Drive symbol Saving Processed Images as FilesImages in the Network Print mode Network orders Network OrdersOperator-Controlled Start Finishing Print Orders Automatic StartPrinting Network Orders Correcting System Conditions Operator’s Guide Kodak Professional RP 30 Laser Printer System Errors Avoiding Handling ErrorsError Messages Reset with the on Button or Stop Button on the Screen Unresolved Errors Error HandlingGray Screen After Reset General Paper Processor Errors Image Processing ErrorsFill print Fit image to paper Other Error Situations Printer ErrorsHelp in Case of Error Messages Shutter not reached MR, ML SGLS01 not reached Belts, sharp corners, and sharp edges in the printer area Removing Paper Jams Paper Jam in the Printer Section Before pulling out the transport unit Paper Jam in the Transport Unit Paper Transport at the Bottom Paper Transport at the Top Sheet Bridge to Transport Unit Operator’s Guide Correcting System Conditions Paper Jam in the Print Engine Correcting System Conditions Operator’s Guide Paper Jam in the Lane Distributor Mechanical damage cannot be ruled out Paper Jam between the Lane Distributor and Sheet Transfer Paper Jam in the Paper Processor Or remove splashes immediately with water Chemical splashes may stain the covers. Use the splash guard Maintenance Other Consumables Kodak Professional Digital III Paper Maintenance jobs to be performed by the customer Maintenance Schedule and Maintenance IntervalsDaily Weekly Monthly Required Performing a Process Control for the Paper Processor Daily Maintenance Maintenance Removing Paper Dust from the Printer Sections Weekly Maintenance Single Sheet Buffer and Sheet Bridge Print Engine Maintenance Important Make sure that the transport belts are not shifted May run in the marked area Lane Distributor Sheet Transfer Stack the crossovers Water over the weekend Removing the CD Color Developer Feed Unit Removing the Tank Crossovers Removing the V Wiper and Squeegee Unit Cleaning Damage Cleaning the Chemical Filters Checking the Solution Levels Cleaning the Filters in Astor and Water Inlets Plates Cleaning the Densitometer Calibration Plate Cleaning the Transport Belt of the Print Chute Checking the Solution Temperatures Monthly MaintenanceSettings Machine settings PP temperature Touch Readjust Them Cleaning / Replacing the Air FiltersDoor to Print Engine Into the print engine Operator’s Guide Kodak Professional RP 30 Laser Printer Maintenance Changing Chemical Filters Procedure Cleaning the Processing Racks Operator’s Guide Maintenance Weekend, be sure to deactivate the automatic MBL Master Cleaning the Dryer RackBalance in order to prevent a paper jam On Monday before starting to work, wipe off all deposits on Maintenance Cleaning / Replacing the Air Filters Cleaning the Paper Cleaning the Guide with the Feed Chute Operator’s Guide Maintenance Operator’s Guide Changing the Ink Ribbon on the Back Printer Maintenance When Required Tanks is 20 L Emptying the Effluent Tanks Chemicals ConsumablesAir Filters Other Consumables Rolls Surface Catalog No Kodak Professional Digital III PaperPage Page Eastman Kodak Company