Emptying the Effluent Tanks, Tanks is 20 L | Kodak RP 30 manual

Operator’s Guide

Emptying the Effluent Tanks

WARNING: Wear protective gloves, a rubber apron, and goggles when you empty the effluent tanks.

As soon as one of the effluent tanks is full, a message appears on the screen advising that this tank must be emptied.

NOTE: It is possible to touch Clear to suppress the message and to continue the work for a while. When the message appears for the third time, it can no longer be cleared.

Empty the full tank:

1.Open the front door at the bottom left of the paper processor. Position (1) marks the drain valves to be opened to empty the effluent tanks.

2.Put a bucket under the respective drain valve. Open the valve and empty the tank. Close the valve.

Perform the same procedure with the adjacent second valve.

CAUTION:	Do not open both valves at the same time. The volume of both
	tanks is 20 L.

IMPORTANT:

•Do not open the drain valves in the vertical position on the right side. They are used to empty the processing tanks CD, BX and SB1 to SB4, for example, when a completely new tank preparation has to be filled into single or all tanks.

•Check the pan (2): If it is full although the customer emptied the tanks always in time, a technician must be called. The hose systems could be defective.

8-38	KODAK PROFESSIONAL RP 30 Laser Printer

Image 230

Kodak RP 30 manual Emptying the Effluent Tanks, Tanks is 20 L

Contents

Laserprinter Operator’s Guide Kodak Professional RP 30 Laser Printer Page Table of Contents Maintenance Production Regulatory and Safety Information Contents Regulatory Compliance Hot Surface SymbolElectrical Hazard Symbol EMC Compliance CE Compliance Laser Compliance and Safety Mechanical Hazard Symbol Operator’s Guide Laser Source Label Locations of Laser Safety Labels When Operating the Equipment Safety PrecautionsGeneral Precautions When Disposing of the Equipment Handling of Processing Chemicals Disposal of Chemicals and Containers Skin and Eye Protection Safety Precautions for the Handling of ChemicalsGeneral Guidelines Storage and Disposal Warranty Repair Coverage Warranty InformationWarranty Period How to Obtain Service Limitations Introduction Operator’s Guide Kodak Professional RP 30 Laser Printer Text Styles Using the DocumentationStructure Indicates the potential for damage to or from the equipment Storage of Chemicals and Paper Consumable Storage Requirements Overview Info Printer Info Paper Processor Components Operator’s Guide Product Description Image Editing Main Computer Functional ProcedurePrinting Sequence Printer Paper Processor Sorter Densitometer Switching On the Equipment Automatic Switch-On Manual Switch-On Readiness for Operation User LoginSystem Start Start Screen Touch Change user End of WorkChanging Users Shutting Down Automatic Shutdown Manual Shutdown Change TimerNext Login Touch Shutdown Switching Off the Machine Partially Sleep Mode Operating Controls Button and Lamp on the Main Computer Touch-screen Monitor Keyboard and Mouse Screen Structure Information Area Operator’s Guide Touch-sensitive Buttons Drop-down Menus Pop-up Windows Overview Input Screen Numeric Keypad Menu Bar Menu Overview Main Menus Print Mode Menu Settings Menu without Machine Settings Settings Menu with Machine Settings Test Menu End of Work Menu Status Information / Help Menus Info Additional Screens Info Printer Info Paper Processor Info Order Version Info Error List Help Index Error Help IndexHelp Documentation Chemicals Operator’s Guide Kodak Professional RP 30 Laser Printer Preparation of Chemicals Following order Cold water after each preparation of a solutionRinsing the Tanks Mixing the Tank Solutions Developer Inserting the Chemical FiltersBleach-Fix Tank Temperature ºC Preparing Replenisher See Paper Processor Settings in Chapter Other Operations to be Performed Prior to Production Start From the Order Receipt to the Finished Print Preparation of the Print Configuration SettingsMachine Settings When to Save Settings Administrator From the Order Receipt to the Finished Print Operator Preparation of the Print Configuration Pfdf Enter paper Flie print Page Adjust shorter Settings Recover settings Entering Names Entering Numbers Settings Machine settings Machine SettingsTypes of Settings Configuration Surface and Paper settings Machine Install SoftwareSet date/time Other settings Production balance Settings Machine settings Surface New Select Pfdf surface Defining Surfaces Defining Paper Settings Settings Machine settings Paper settings Operator’s Guide Paper Width Width Indicators Surface Indicators Coding the Paper Magazine Settings Machine settings Cut length Defining Cut Lengths User Interface User Administrator Defining Users and User Rights Settings Machine settings User manager − Language, Keyboard, Preview frequency, Beep touch − Password, Repeat− Edit Rights Button Description Configurations− User rights Preview Startup Defining the Start Time / Standard User Timer Settings Machine settings Startup Edit calendar Calendar Defining Off Days Installing the Software Settings Machine settings Install software Printer Settings Paper Processor Settings Settings Machine settings PP replenishment Settings Machine settings Productions Balance Digital Production Balance Digital Settings Impact Sharpening Sharpness of EdgesShifting towards + Soft-focus effect Unsharpness Sharpness of GrainFine structuring Detail Contrast Remote Order File Print Digital Order SettingsSettings Machine settings Network orders Resource name Automatic printing On/Off Remote Order AutosaveComputer name Address or name Name or IP address Other Settings Max. PpF DTFS Preselection Print Configurations Settings Print configurations Paper Backprint Correction AutoSave Front print Order Creating a New Configuration Based on an Existing One Creating, Editing, and Deleting ConfigurationsCreating a New Configuration Editing a Configuration Deleting a Configuration Settings Print configurations Paper New or Edit Paper ConfigurationsCreating a Paper Configuration Select from the Paper Settings and the Paper Surfaces Touch Save or Save as Backprint Configurations Select Save or Save as Operator’s Guide Correction Configurations Settings Print configurations Corrections New or Edit Operator’s Guide Autosave Configurations Settings Print configurations Autosave New or Edit Quantity Autosave fixed File formatDrive Resolution Autosave quality File format Resolution and File format as in Autosave quality CD, Internet Upload, Normal Front Print Configurations Select Save or Save as Order Configurations Reproduction SinglePackage Select Film mask File print Creating a Single ConfigurationSpecify Paper configuration and Cut length Select Configurations Creating a Package ConfigurationSet the Configuration type to Package Select Film mask and Film type Reproduction Configuration Types in the Order Configuration List Black-and-White and Sepia Prints Defining a Configuration as the Standard Configuration Procedure Saving and Loading Settings and ConfigurationsWhen to Save Settings Settings Save settings Load Settings Settings Load settings Tests Operator’s Guide Kodak Professional RP 30 Laser Printer Overview IntroductionPrinter Tests Test Start PBL Prerequisites for MBL and PBL CalibrationPrinting a PBL Test PBL Test with Laser Point Printing an MBL Test Test Start MBL See Save/Load Settings and Configurations in , Settings Daily Calibration With the MBL Daily Calibration Without the MBL Calibration of New Paper, Emulsion Changes Master Paper Completion of the New Calibration Testing the Paper Processor Test Control strip Chemical control strip Operator’s Guide Kodak Professional RP 30 Laser Printer Production Operator-Controlled Start Preparing the Equipment for Different Orders Preparing the Paper Magazine Operator’s Guide Putting Paper in the Magazine Important Avoid fogging of the leading paper edge Chapter Paper Widths Not Yet Coded Changing the Paper Magazine Manual Order Number Order ProcessingOrder Number Automatic / Manual Automatic Order Number End of Order Automatic / Manual Print Modes Printing File Print Prerequisites DTFS Selecting the Configuration Type for an Order Single or Package Black-and-White or Sepia Prints Using Autosave to Save Processed Images without PrintingReproduction With Change Config Changing the Configuration and the Order NumberChanging the Current Configuration Changing the Order Number Selecting a Different ConfigurationUnder Machine settings / Other settings Loading Image Files from Data Carriers Touch Start print or Save order Touch Save order Saving Digital OrdersLoading Saved Digital Orders Touch Finish order Printing File Prints without PreviewTouch Start print Touch Prepare order Printing File Prints with Preview Image Editing and Special in All Print Modes with Preview Touch Enter text Special TextImage Improvement Touch Format text. a new screen opens Images in the Network Select File format, Resolution, and the Drive symbolSaving Processed Images as Files Operator-Controlled Start Print mode Network ordersNetwork Orders Printing Network Orders Finishing Print OrdersAutomatic Start Correcting System Conditions Operator’s Guide Kodak Professional RP 30 Laser Printer Error Messages System ErrorsAvoiding Handling Errors Reset with the on Button or Stop Button on the Screen Gray Screen After Reset Error HandlingUnresolved Errors General Fill print Image Processing ErrorsPaper Processor Errors Fit image to paper Help in Case of Error Messages Printer ErrorsOther Error Situations Shutter not reached MR, ML SGLS01 not reached Removing Paper Jams Belts, sharp corners, and sharp edges in the printer area Paper Jam in the Printer Section Paper Jam in the Transport Unit Before pulling out the transport unit Paper Transport at the Bottom Paper Transport at the Top Sheet Bridge to Transport Unit Operator’s Guide Correcting System Conditions Paper Jam in the Print Engine Correcting System Conditions Operator’s Guide Paper Jam in the Lane Distributor Paper Jam between the Lane Distributor and Sheet Transfer Mechanical damage cannot be ruled out Paper Jam in the Paper Processor Chemical splashes may stain the covers. Use the splash guard Or remove splashes immediately with water Maintenance Other Consumables Kodak Professional Digital III Paper Daily Weekly Monthly Maintenance Schedule and Maintenance IntervalsMaintenance jobs to be performed by the customer Required Daily Maintenance Performing a Process Control for the Paper Processor Maintenance Weekly Maintenance Removing Paper Dust from the Printer Sections Single Sheet Buffer and Sheet Bridge Print Engine Maintenance Important Make sure that the transport belts are not shifted Lane Distributor May run in the marked area Sheet Transfer Water over the weekend Stack the crossovers Removing the CD Color Developer Feed Unit Removing the Tank Crossovers Cleaning Removing the V Wiper and Squeegee Unit Damage Checking the Solution Levels Cleaning the Chemical Filters Cleaning the Filters in Astor and Water Inlets Cleaning the Densitometer Calibration Plate Plates Cleaning the Transport Belt of the Print Chute Settings Machine settings PP temperature Monthly MaintenanceChecking the Solution Temperatures Touch Readjust Door to Print Engine Cleaning / Replacing the Air FiltersThem Into the print engine Operator’s Guide Kodak Professional RP 30 Laser Printer Maintenance Procedure Changing Chemical Filters Cleaning the Processing Racks Operator’s Guide Maintenance Balance in order to prevent a paper jam Cleaning the Dryer RackWeekend, be sure to deactivate the automatic MBL Master On Monday before starting to work, wipe off all deposits on Maintenance Cleaning the Paper Cleaning / Replacing the Air Filters Cleaning the Guide with the Feed Chute Operator’s Guide Maintenance Operator’s Guide Maintenance When Required Changing the Ink Ribbon on the Back Printer Emptying the Effluent Tanks Tanks is 20 L Air Filters ConsumablesChemicals Other Consumables Kodak Professional Digital III Paper Rolls Surface Catalog NoPage Page Eastman Kodak Company