Operator’s Guide

Cleaning the Dryer Rack

Necessary tools are:

Screwdriver or coin

Lint-free cloth and warm water

1.Remove the dryer cover. Use a coin to turn the lock by 90º.

2.Loosen the locking screw (knurled screw 1) of the dryer rack. Pull out the rack on the telescopic rails.

3.Remove only the feed roller set after unscrewing the knurled screw (2) and put it in water over the weekend.

CAUTION:

If the rollers are not mounted prior to the automatic start after

 

the weekend, be sure to deactivate the automatic MBL (Master

 

Balance) in order to prevent a paper jam.

 

On Monday before starting to work, wipe off all deposits on the

 

feed rollers and the feed plate with a damp cloth.

4.Clean the guide roller behind the feed rollers with a damp cloth.

5.Check all foam plastic rollers (3) for damages and replace them if necessary.

8-30

KODAK PROFESSIONAL RP 30 Laser Printer

Page 222
Image 222
Kodak RP 30 manual Cleaning the Dryer Rack, Weekend, be sure to deactivate the automatic MBL Master