DURING A CALL

ADJUSTING THE SPEAKER VOLUME

Adjust the speaker volume using the buttons and .

PLACING CALLS ON TEMPORARY HOLD

Mute

Press (Mute) to turn off the microphone.

The LEDs change from blue to red. The other party cannot hear what you are saying.

Press (Mute) to reconnect the call.

Hold

Press HOLD to put the call on hold.

The LEDs change from blue to flashing red. Both the microphone and the speaker are turned off and the call is on hold.

Press HOLD to reconnect the call.

ENDING CALLS

End the call by pressing .

SECURE CONNECTION

The Konftel 300IP supports secure data connections between devices (authentication and encryption). This feature must be activated by the administrator.

You know the feature is activated if you see a closed padlock in the lower right-hand corner of the display screen when the Konftel 300IP has a secure connection to the other phone. If the phone or PBX you are calling does not support secure connections, you will see an open padlock on the screen. See the illustration on page 5.

10

Page 12
Image 12
Konftel 910101063 manual During a Call, Adjusting the Speaker Volume, Placing Calls on Temporary Hold, Ending Calls