55.4 Making Copies on Manually Fed Paper
5-16 bizhub 180
Before Making Copies Chapter 5
Copying Onto Manually Fed Paper
To copy using the Manual bypass
1Load the document to be copied.
❍Refer to “Loading the Document” on page3-9.
2Adjust the paper guides to fit the size
of the paper.
3Insert one sheet of paper with the front
side facing down, lightly sliding the
paper as much as possible into the
feed slot.
The manual bypass mark ( )
appears in the bottom line of the
screen.
?Is a card or a postcard loaded?
➜Make sure that it is not curled
(rolled).
4Press the [No/C] key.
The “PAPER SOURCE SETUP” menu appears.
5Use the and keys to select
the type of paper loaded.
❍Select from the following four
paper type settings.
“PLAIN”
“OHP”
“CARD”
“ENVELOPE”
6Press the [Yes] key.
The “PAPER SIZE” menu appears.