7.6 Specifying Copy Settings 7
bizhub 180 7-45
Utility Mode – Copy Functions Chapter 7
To specify the binding width (“MARGIN SETTING” function)
1Select the “COPY SETTING 1” menu.
❍Refer to “To select the “COPY
SETTING 1” menu” on page7-39.
2Press the [6] key from the 10-Key Pad
to select “MARGIN SETTING”.
3Using the 10-Key Pad, enter the
binding width (margin), and then press
the [Yes] key.
❍The binding width can be set
between 0 inch (0 mm) and 13/16
inch (20 mm).
❍If you wish to correct the setting, press the [No/C] key, and then enter the
new number.
The “COPY SETTING 1” menu appears again.