77.5 Specifying Administrative Settings (“ADMIN. MANAGEMENT” Menu)
7-26 bizhub 180
Utility Mode – Copy Functions Chapter 7
To select the “ADMIN. MANAGEMENT” menu
1Press the [Utility] key.
“MACHINE SETTING?” appears.
2Press the key 3 times to select
“ADMIN. MANAGEMENT?”.
3From the 10-Key Pad, press the key ([1] through [2]) for the “ADMIN.
MANAGEMENT” function that you wish to set.
❍The “ADMIN. MANAGEMENT” functions are as follows:
1 AUTO SHUT OFF
2 COPY TRACK
4Using the 10-Key Pad, enter the 6-
digit administrator access number,
and then press the [Yes] key.
❍To correct the administrator
access number, press the [No/C]
key, and then enter the new
number.
✎
Tip
If, at any time, you wish to quit setting an “ADMIN. MANAGEMENT” function,
press the [No/C] key. When the message “STOP SETTING?” appears, press
the [Yes] key to quit.