8.4 Main Error Messages and Their Remedies 8bizhub 180 8-19
Error Messages Chapter 8
SET ORIGINAL TO ADF A document was not loaded into
the Document feeder before
beginning a copy function (such
as, “2in1” copying or “Mixed Orig.”
copying) that uses the Document
feeder. Otherwise, the Document
feeder is lifted up.
Load a document into the Document
feeder.
Securely close the Document
feeder.
REMOVE PAPER When interrupting a copy job to
perform a different copy operation
other than the “Book Separation”
function, the document for the
interrupted copy job was left in the
Document feeder.
Remove the document from the
Document feeder.
TEXT/P ×1.00
ä[A]ü#XXX:EMPTY (While specifying Copy settings)
The selected paper tray has run
out of paper.
“#” indicates the paper tray, and
“XXX” indicates the paper size.
Either load paper of the specified
size into the specified paper tray, or
press the [Paper] key and select a
different paper size.
NO SUITABLE PAPER •While copying, the size of the
paper in the selected paper tray
has changed.
•While copying documents with
mixed sizes using the Auto
Paper function, paper of a
suitable size could not be
found.
“#” indicates the paper tray, and
“XXX” indicates the paper size.
Either load paper of the specified
size, or press the [Paper] key and
select a different paper size.
(Flashing alternately)
LOAD PAPER (#XXX)
APS SIZE ERROR While copying using the Auto
Paper function, paper of a suitable
size could not be found.
Either load paper of a suitable size,
or press the [Paper] key and select a
different paper size.
AMS SIZE ERROR While copying using the Auto Size
function, the combination of the
document and paper sizes caused
the zoom ratio to exceed the range
between ×0.5 and ×2.0.
Either load paper of a suitable size,
or use the and keys to
specify the zoom ratio.
PAPER SIZE ERROR The paper loaded in the paper tray
caused a size error.
“#” indicates the paper tray, and
“XXX” indicates the paper size.
•For a Paper feed unit, remove the
loaded paper, and then reload the
paper according to the procedure
described in “Loading Paper” on
page3-4.
•For a custom paper size, refer to
“To copy onto label sheets” on
page4-8.
•For the Manual bypass, remove
the loaded paper, and then refer
to “To copy onto label sheets” on
page4-8. For the Ma nual bypass,
remove the loaded paper, and
then reload the paper according
to the procedure described in
“Copying Onto Manually Fed
Paper” on page5-16.
•For a custom paper size, refer to
“To copy onto postcards” on
page4-14.
(Flashing alternately)
RESET PAPER (#XXX)
Message Cause Remedy