55.7 Specifying a Zoom Setting
5-34 bizhub 180
Before Making Copies Chapter 5
To make copies using the “X/Y Zoom” function
1Load the document to be copied.
❍Refer to “Loading the Document” on page3-9.
2Press the [X/Y Zoom] key until the “X/
Y Zoom” indicator lights up.
3Using the and keys, select the desired zoom ratio for the length (X), and
then press the [Yes] key.
❍The zoom ratio increases and decreases in 0.01 increments.
❍Press the [Zoom] key, and then select the desired zoom ratio. Eac h press of
the [Zoom] key changes the zoom ratio as shown below.
× 0.50 → × 0.64 → × 0.78 → ×1.00 → × 0.50 . . .
✎
Tip
Press the [No/C] key to return to the main screen. To correct the specified
zoom ratio, press the [No/C] key, and then perform the operation again from
step 2.
Width (Y)
Length
(X)