55.9 Interrupting Copy Jobs
5-38 bizhub 180
Before Making Copies Chapter 5
5.9 Interrupting Copy Jobs
Long continuous copy operations can quickly be paused by pressi ng the [Interrupt ]
key in order to copy a different document.
✎
Note
Some functions cannot be interrupted. In addition, some functions are not
available while a copy job is interrupted. For details, refer to “Function
Combination Table” on page10-9.
If the document is placed on the Original glass and 2in1 or 4in1 copies are being
produced, the copy job cannot be interrupted.
To interrupt a copy job
1Press the [Interrupt] key. The Interrupt
indicator lights up, and the current
copy operation is paused.
❍When the [Interrupt] key is
pressed, all functions are reset to
their defaults.
2Remove the current document, and then load the other document that you wis h
to copy.
3If necessary, specify any other copy settings.
❍Paper (p.5-22)
❍Zoom (p.5-30)
❍Copy density (p.5-36)
❍Advanced Copy Operations (p.6-1)
4Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key to copy the other document.