6.4 Erasing Sections of Copies 6
bizhub 180 6-17
Advanced Copy Operations Chapter 6
To make copies using an Erase setting
1Load the document to be copied.
❍Refer to “Loading the Document” on page3-9.
2Press the [Erase] key.
The “Erase” indicator lights up.
3Using the and keys, select
“LEFT”, “UPPER” or “FRAME” to
specify the area that will be erased.
?Do you know how large an area is
erased?
➜The width of the erased area for
the “LEFT”, “UPPER” and
“FRAME” settings can be set
between 3/16 inch (5mm) and 13/
16 inch (20 mm), in Approx.1/16
inch (1 mm) increments. The
manufacturer’s default setting is 3/8 inch (10 mm).
➜The width of the erased area for the “LEFT”, “UPPER” and “FRAME”
settings can be changed using the “ERASE SETTING” function in the Utility
mode (“To specify the erased width (“ERASE SETTING” function)” on
page7-46).
4Press the [Yes] key.
The main screen appears.
5If necessary, specify any other copy settings.
❍Before Making Copies (p. 5-1)
❍Advanced Copy Operations (p. 6-1)
6Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key.