bizhub C652/C652DS/C552/C452 2-9
2.3 Setup procedure 2
2.3 Setup procedureTo use this printing system, you must complete the setup in advance.
The setup refers to a series of procedures for connecting the machine to the computer and installing the
printer driver to the computer.
Perform the setup using the following procedures.
2.3.1 For network connection
1Connect this machine to the computer.
2Check that the computer to be used is connected to the network.
3Specify the IP address of the machine, and then connect it to the network.
4Change the network settings for the machine according to the connection method or protocol.
%LPR: In "LPD Setting", enable LPD printing.
%Port 9100: In "TCP/IP Settings", enable the RAW port number (initial setting: "9100").
%SMB: Configure settings of "Print Settings" in "SMB Setting".
%IPP/IPPS: In "IPP Setting", enable IPP printing. To use IPPS printing, install the certificate in
advance.
%Web Service Print: In "Web Service Settings", enable the print function.
%Bonjour: In "Bonjour Setting", enable Bonjour.
%AppleTalk: In "AppleTalk Setting", enable AppleTalk.
5Install the printer driver.
%Specify the network port for the printer driver according to the connection method or protocol.
6Install the screen fonts.
%The DVD-ROM contains the European TrueType fonts as "screen fonts". The Screen Font or Screen
Fonts folder in the DVD-ROM contains the screen fonts.
%Install the screen fonts using the standard function for the OS of adding fonts. For details, refer to
Help of the Operating System.
%Macintosh fonts are compressed. Decompress them before installing.
Reference
-After installing the printer driver, perform test print to make sure that the connections are made
properly.
dReference