bizhub C652/C652DS/C552/C452 5-5
5.1 Mac OS X 10.2/10.3/10.4/10.5 5
Configuring the AppleTalk settings
Configuring the AppleTalk settings for the machine
Enable AppleTalk in "AppleTalk Setting", and then enter the printer name.
dReference
For details on the AppleTalk settings for the machine, refer to the "User's Guide [Network Administrator]".
Configuring the AppleTalk settings for the computer
Configure the AppleTalk settings for the Macintosh computer connected to the printer.
1In the "Apple" menu, select "System Preferences".
2Click the "Network" icon.
3The Ethernet setting window appears.
%For OS X 10.5, select "Ethernet", and then click [Advanced].
%For OS X 10.4, select "Built-in Ethernet", and then click [Configure].
4Double-click the "AppleTalk" tab to enable AppleTalk.
5Click the close button at the top left corner of the window.
%When the "This service has unsaved changes" message appears, click [Apply].
Adding a printer
1In the "Apple" menu, select "System Preferences".
2Click the [Print & Fax] icon.
3Click [+] on the "Print & Fax" window.
4Click [Default].
Connected printers are detected.
%If no printer is detected, turn your printer off then on again.
In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.
If you turn the printer on immediately after turning it off, it may not function correctly.
5From the "Printer Name" list, select the desired AppleTalk-connected model name.
The printer driver corresponding to the selected printer name is automatically selected.
%After the printer driver is selected, go to Step 7.
%If an incorrect printer driver is selected, go to Step 6.
6Select the desired printer driver manually.
%When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then select
the printer driver of the desired model name from the list.
%When OS X 10.4 is used, select "KONICA MINOLTA" from the "Print Using", and then select the
printer driver of the desired model name from the list.
7Click [Add].
When the selected printer is registered in the "Print & Fax", the setting procedure is completed.
%If the "Installable Options" window appears, proceed to change the option settings as necessary.
For details, refer to page 9-5.
Reference
-For OS X 10.4, you can also add a printer by clicking [Add] in the "Printer Setup Utility" window.