bizhub C652/C652DS/C552/C452 4-5
4.1 Windows Vista/Server 2008 4
5Click "Add a local printer".
The page for selecting a printer port appears.
6Click "Create a new port", and then select the port type.
%To use the LPR/Port 9100 protocol, select "Standard TCP/IP Port".
%To use the SMB connection, select "Local Port".
7Click [Next].
8Specify the IP address and port.
%To use the LPR/Port 9100 protocol, select "TCP/IP Device", and then enter the IP address.
%To use the SMB connection, enter "\\NetBIOS name\print service name" in the "Port Name" box.
%Enter the same NetBIOS name and print service name specified in "Print Setting" in "SMB Setting".
9Click [Next].
%If the "Additional Port Information Required" page appears, go to Step 10.
%If the "Install the printer driver" page appears, go to Step 13.
10 Select "Custom", and then click [Settings].
11 Change the settings according to the port, and then click [OK].
%For LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
%You must discriminate between upper and lower case letters when entering it.
%For Port 9100, select "RAW", and then enter a RAW port number (initial setting: "9100") in the "Port
Number" box.
%If both LPR and Port 9100 are enabled on the printer, the printer driver is connected to the machine
using LPR.
12 Click [Next].
The "Install the printer driver" page appears.
13 Click [Have Disk].
14 Click [Browse].
15 Select a desired printer driver folder in the DVD-ROM, and then click [Open].
%Select a folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers:
PCL driver, PS driver, XPS driver and fax driver
16 Click [OK].
The "Printers" list appears.
17 Click [Next].
18 Follow the instructions on the pages that follow.
%If the "User Account Control" window appears, click [Continue].
%If the "Windows Security" window for verifying the publisher appears, click "Install this driver
software anyway".
19 Click [Finish].
20 After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers" window.
21 Remove the DVD-ROM from the DVD-ROM drive.
This completes the printer driver installation.