Konica Minolta C652DS 7, 8, 1, 2, 3, 4, 5, 6

Mac OS X 10.2/10.3/10.4/10.5
5
5-8 bizhub C652/C652DS/C552/C452
5.1
7Select the desired printer driver manually.
%When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then select
the printer driver of the desired model name from the list.
%When OS X 10.4 is used, select "KONICA MINOLTA" from the "Print Using", and then select the
printer driver of the desired model name from the list.
8Click [Add].
When the selected printer is registered in the "Print & Fax", the setting procedure is completed.
%If the "Installable Options" window appears, proceed to change the option settings as necessary.
For details, refer to page9-5.
Reference
-For OS X 10.4, you can also add a printer by clicking [Add] in the "Printer Setup Utility" window.
5.1.3 Selecting and connecting a printer (OS X 10.2/10.3)
In OS X 10.2/10.3, the printer can be connected with Rendezvous, AppleTalk, LPR (LPD), or IPP.
After configuring the network setting for the machine, selecting this machine as the printer to be used in
"Printer Setup Utility" or "Print Center" enables printing.
Configuring the Rendezvous settings
Configuring the Bonjour settings for the machine
Enable Bonjour in "Bonjour Setting" for the machine, and then enter the Bonjour name.
dReference
For details on the Bonjour settings for the machine, refer to the "User's Guide [Network Administrator]".
Adding a printer
1Select "Macintosh HD" - "Applications" - "Utilities" where the driver was been installed, and then
double-click [Printer Setup Utility] or [Print Center] to open it.
2When the "You have no printers available." window appears, click [Add]. When the printer list appears,
click [Add].
%If available printers have already been specified, the "You have no printers available." window does
not appear.
3Select "Rendezvous" for the connection method.
Connected printers are detected.
%If no printer is detected, turn your printer off then on again.
In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.
If you turn the printer on immediately after turning it off, it may not function correctly.
4From the "Name" list, select the desired model name.
The printer driver corresponding to the selected printer name is automatically selected.
%After the printer driver is selected, go to Step 6.
%If an incorrect printer driver is selected, go to Step 5.
5Select the desired printer driver manually.
%From "Printer Model", select "KONICA MINOLTA", and then select the desired model from the list
of model names.
6Click [Add].
When the selected printer is registered in the "Printer List", the setting procedure is completed.