Mac OS X 10.2/10.3/10.4/10.5
5
5-6 bizhub C652/C652DS/C552/C452
5.1
Configuring the LPR settings
TCP/IP setting for the machine
Specify the IP address for the machine.
LPD setting for the printer
Before using LPR printing, enable LPD printing in "LPD Setting" for the machine.
dReference
For details on specifying the IP address for the machine, refer to the "User's Guide [Network Administrator]".
For details on the LPD settings for the machine, refer to the "User's Guide [Network Administrator]".
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1In the "Apple" menu, select "System Preferences".
2Click the "Network" icon.
3The Ethernet setting window appears.
%For OS X 10.5, select "Ethernet", and then click [Advanced].
%For OS X 10.4, select "Built-in Ethernet", and then click [Configure].
4Click the "TCP/IP" tab.
5Configure the settings including the IP address and subnet mask according to the settings of the
network to which the Macintosh computer is connected.
6Click the close button at the top left corner of the window.
%When the "This service has unsaved changes" message appears, click [Apply].
Adding a printer
1In the "Apple" menu, select "System Preferences".
2Click the [Print & Fax] icon.
3Click [+] on the "Print & Fax" window.
4Click [IP] or [IP Printer].
5In "Protocol", select "LPD".
6In "Address", enter the IP address for the machine.
The printer driver corresponding to this machine being identified with its IP address is automatically
selected.
%After the printer driver is selected, go to Step 8.
%If an incorrect printer driver is selected, go to Step 7.
7Select the desired printer driver manually.
%When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then select
the printer driver of the desired model name from the list.
%When OS X 10.4 is used, select "KONICA MINOLTA" from the "Print Using", and then select the
printer driver of the desired model name from the list.