bizhub C652/C652DS/C552/C452 4-23
4.4 Windows NT 4.0 4
4.4 Windows NT 4.0
4.4.1 For network connection (LPR)
To use LPR printing, specify the port while installing the printer driver.
Settings for the machine
To use LPR printing, you must configure the network settings for the machine in advance.
dReference
For details on the network settings for the machine, refer to the "User's Guide [Network Administrator]".
Installing the printer driver using the Add Printer Wizard
0Installing the driver to Windows NT 4.0-based computers requires the administrator authority.
0In Windows NT 4.0, to use the LPR port, you must have the Microsoft TCP/IP Printing service installed
in your computer.
1Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
2Press the [Start] key, and then select "Settings" - "Printers".
3Double-click the "Add Printer" icon.
"Add Printer Wizard" starts.
4On the window for specifying how the printer is attached, select "This computer".
5Click [Next].
A page for selecting a port appears.
6Click [Add Port].
7From the "Available Printer Ports" list, select "LPR Port", and then click [New Port].
8Enter the IP address of the machine in the "Address" box, enter "Print" in the "Queue Name" box, and
then click [OK].
%You must discriminate between upper and lower case letters when entering it.
9Select the created port, and then click [Next].
10 Click [Have Disk].
11 Click [Browse].
12 Select a desired printer driver folder in the DVD-ROM, and then click [Open].
%Select a folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers: PCL driver and fax driver
13 Click [OK].
The "Printers" list appears.
14 Click [Next].
Items to be configured Description
IP address In "TCP/IP Setting" of the machine, specify the IP address.
LPD Setting To use LPR printing:
In "LPD Setting" for the machine, enable LPD printing.