bizhub C652/C652DS/C552/C452 4-3
4.1 Windows Vista/Server 2008 4
4 Manual Installation Using the Add Printer Wizard
This chapter describes the procedure for installing the Windows printer driver using the standard Windows
Add Printer function.
-After installation, correctly configure the initialization conditions such as the model name, installed
options, function version, user authentication and account track functions for the machine in the
"Configure" tab of the printer driver before use. For details, refer to page9-5.

4.1 Windows Vista/Server 2008

4.1.1 For network connection (LPR/Port 9100/SMB)

In Windows Vista/Server 2008, you can install the printer driver either by searching for the printer on the
network, or by creating a new printer port.
Settings for the machine
Before using Port 9100, LPR, or SMB printing, you must configure the network settings for the machine.
dReference
For details on the network settings for the machine, refer to the "User's Guide [Network Administrator]".
To use SMB printing in the IPv6 environment, "Direct Hosting setting" for the machine must be enabled. For
details, refer to the "User's Guide [Network Administrator]".

Installing the printer driver by searching for the printer using the Add Printer

Wizard

0Installing the driver to Windows Vista/Server 2008-based computers requires the administrator
authority.
0Since the printer is searched for during the installation, be sure to connect the machine to the network
before turning it on.
1Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
2Press the [Start] key, and then select "Control Panel".
3Click "Printer" under "Hardware and Sound".
The "Printers" window appears.
%When "Control Panel" is displayed in Classic View, double-click "Printer".
4Click [Add a printer] on the toolbar.
"Add Printer Wizard" starts.
Items to be configured Description
IP address In "TCP/IP Settings" of the machine, specify the IP address.
RAW port number To use Port 9100 printing:
In [TCP/IP Settings] for the machine, enable the RAW port number
(initial setting: "9100").
LPD Setting To use LPR printing:
In [LPD Setting] for the machine, enable LPD printing.
SMB Setting To use SMB printing:
At [Print Settings] in [SMB Settings] for the machine, specify NetBI-
OS Name, Print Service Name, and Workgroup.