Windows 2000
4
4-22 bizhub C652/C652DS/C552/C452
4.3
4.3.4 For local connection
When this machine is connected via a USB port, the printer driver can be installed with plug and play.
Reference
-When a USB connection is used, the printer driver is installed easily with the plug and play feature.
However, it can also be installed using the Add Printer Wizard. To use the Add Printer Wizard, select
the USB port to be connected in the "Select a Printer Port" page.
1Connect the machine to the computer using a USB cable, and then start the computer.
NOTICE
When starting up the computer, do not plug in or unplug the cable.
2Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
3Turn on the main power of the machine.
The "Found New Hardware Wizard" window appears.
%If the "Found New Hardware Wizard" window does not appear, turn the machine off, then on again.
In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.
If you turn the printer on immediately after turning it off, it may not function correctly.
4Click [Next].
5Select "Search for a suitable driver for my device (recommended)", and then click [Next].
6Select "Specify a location", and then click [Next].
7Click [Browse].
8Select a desired printer driver folder in the DVD-ROM, and then click [Open].
%Select a folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers:
PCL driver, PS driver and fax driver
9Click [OK], and then follow the instructions on the pages that follow.
10 Click [Finish].
%If the "Digital Signature" window appears, click [Yes].
11 After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers" window.
12 Remove the DVD-ROM from the DVD-ROM drive.
This completes the printer driver installation.