Konica Minolta C652DS - page 72

Mac OS 9.2
5
5-12 bizhub C652/C652DS/C552/C452
5.2
5.2 Mac OS 9.2
5.2.1 Installing the printer driver
After being connected, this machine can be used as a printer by selecting a PostScript printer and specifying
the"printer description (PPD) file".
First, copy the "printer description (PPD) file" to the computer.
1Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
2Open the folder in the DVD-ROM that contains the desired printer driver.
%Select a folder according to the printer driver, operating system, and language to be used.
3Select the PPD file "KONICAMINOLTAC652UVxxx.ppd", and then copy it into "Printer Description
folder" that can be accessed by selecting "Macintosh HD" - "System Folder" - "Extensions".
This completes the printer driver installation.
5.2.2 Selecting and connecting a printer
In OS 9, the printer can be connected using AppleTalk or LPR (LPD).
Configure the network settings for the machine, and then select the printer.
Configuring the AppleTalk settings
Configuring the AppleTalk settings for the machine
Enable AppleTalk in "AppleTalk Setting", and then enter the printer name.
dReference
For details on the AppleTalk settings for the machine, refer to the "User's Guide [Network Administrator]".
Configuring the AppleTalk settings for the computer
Configure the AppleTalk settings for the Macintosh computer connected to the printer.
1In the "Apple" menu, select "Control Panel" - "AppleTalk".
2From "Connect via", select "Ethernet".
3Click the close button at the top left corner of the window.
%When the "Save changes to the current configuration?" message appears, click [Save].
Selecting a printer
1In the "Apple" menu, select "Chooser".
2Make sure that "AppleTalk" is set to "Active", and then click the "LaserWriter" icon.
3From the "Select a PostScript Printer" list, click the desired model name, and then click [Create].
The window for selecting a PostScript printer description (PPD) file appears.
%If a different PPD file has already been selected, click [Setup] in Step 3, and then click [Select PPD]
from the window that is already displayed.
4Click the applicable PPD file, and then click [Select] (or [Open]).
When the selected printer is registered in the "Chooser", the setting procedure is completed.
%If the window showing the installable options appears, proceed to change the option settings as
necessary. Go to Step 5.
%If the "Chooser" window appears, go to Step 7.
5Specify the options installed in the machine in the "Options Installed 1" and "Options Installed 2"
windows.