Konica Minolta CS-200 Placing Batteries

Installing

Placing Batteries

Warning (Failure to adhere to the following points may result in death or serious injury.)

Do not dispose of batteries in fire, short their terminals, apply heat to them or disassemble them. Doing so may cause explosion or liquid leakage, resulting in fire or injury.

Should liquid leak from battery and contact to eye, wash liquid off with clean water without rubbing eyes and immediately seek for medical professional's advice. In case liquid contacts with hand or clothes, wipe liquid off with plenty of water. Avoid further use of such instrument.

Insulate battery contact with such object as tape in disposing of batteries. Contact to other metal object may cause heat, explosion or fire. Follow local regulation for proper disposal or recycle of batteries.

Should instrument or AC adapter be damaged or smoke or odd smell be gen- erated, do not keep using it without correction. Doing so may cause fire. In such situations, switch power off immediately, unplug AC adapter (or remove batteries in using ones) and contact the nearest KONICA MINOLTA SENSING authorized service facility.

Caution

(Failure to adhere to following points may result in injury or

damage to instrument or other property.)

Do not use batteries other than those specified by KONICA MINOLTA SENS- ING. Or do not use new and old batteries together or combine different type batteries. When installing batteries in this instrument, make sure that they are correctly placed according to (+) and (-) marks. Failure to any of these may

damage battery or leak liquid, resulting in fire, injury or air pollution.

Note on Use

Remove batteries if unused for 2 weeks or longer. If not, liquid in battery may leak, which

would damage this instrument.

To avoid draining of battery, sleep mode setting is available for the case not using for 30

minutes. See p.56 for details.

If batteries are installed and AC adapter is used, power is supplied through AC adapter.

Remaining Battery Level Mark

Mark indicating remaining battery level appears on bottom left of LCD screen.

■■■■■■■■■■■■
■■■■		■■ ■■■■	mark indicates that remaining battery level is low. If this appears, replacement with
■■■■	■■■ ■■
■■■■■■■■■■■■
■■■■	■■■■ ■■
■■■■	■■■■■ ■■
■■■■	■■■■■■ ■■
■■	■■■■■■■ ■■
■■		■■
			new ones or AC adapter connection is recommended.
■■■■■■■■■■■■
■■		■■	mark indicates that there is no battery left. This instrument cannot be used. Re-
■■	■■ ■■
■■■■	■■■ ■■
■■■■■■■■■■■■
■■■■	■■■ ■■
■■■■	■■	■■
■■■■	■■	■■
■■		■■
■■		■■

place with new ones or connect AC adapter.

Make sure that power switch is off before replacing batteries or connecting AC adapter.

24