Konica Minolta Di2010 user manual Setting Machine Access, Get Penalty

6.6 Setting Machine Access

6.6Setting Machine Access

6

Get Penalty

The “Get Penalty” function is used to specify whether (“On”) or not (“Off”) access to Administrator mode, mailbox print jobs and user boxes is monitored.

If the “Get Penalty” function is set to “On”, the number of incorrect attempts to ac- cess Administrator mode, mailbox print jobs and user boxes is counted. After three incorrect attempts, access to the machine is denied. To allow Administrator mode to be accessed again, turn the machine off, then on again. However, to allow mail- box print jobs and user boxes to be accessed again, the penalty must be removed. For more details, refer to the Printer Controller User Manual.

To make settings for the “Get Penalty” function

1Follow the procedure described in “To display the Administrator Management screens” on page 6-2 to display the Administrator Management screen.

2Touch [Admin. 2], and then touch [Get Penalty].

Chapter 6

3To use the “Get Penalty” function, touch [ON]. To stop using the “Get Penalty” function, touch [OFF].

Administrator Management Operations

Di2010/Di2510/Di3010/Di3510 6-21