Konica Minolta Di2010 user manual Administrator Settings

Administrator Management Operations Chapter 6

6	6.3 Administrator Settings
	✎

Note

If the entered administrator code is incorrect, the message “Incorrect code and new administrator. Input administrator code.” appears. Type in the cor- rect administrator code.

When the “Get Penalty” function is set to “ON”, incorrectly typing the admin- istrator code is counted as an incorrect attempt to access the machine. After three incorrect attempts, the Utility screen is displayed, access to Adminis- trator mode is denied, and the administrator code (administrator password) will not be accepted. To allow access to Administrator mode, turn the ma- chine off, then on again.

5 Touch [New Code], and then use the 10-Key Pad to type in the new 8-digit administrator code (Admin. Password).

❍ Press the [C] key to erase all entered text.

❍ To return to the previous screen, touch [Cancel].

✎

Note

If the entered administrator code does not have 8 digits, the message “In- correct code and new administrator. Input administrator code.” appears. Type in an 8-digit administrator code.

6 Touch [Retype New Code], and

then use the 10-Key Pad to retype

the new 8-digit administrator code

(Admin. Password).

❍ Press the [C] key to erase all entered text.

❍ To return to the previous screen, touch [Cancel].

✎

Note

If the entered administrator code does not have 8 digits, the message “In- correct code and new administrator. Input administrator code.” appears. Type in an 8-digit administrator code.

7 Touch [Enter].

6-8 Di2010/Di2510/Di3010/Di3510