5.3 Changing Default Settings

5

 

 

To set the “LCD Back-light Off” function

This function is used to specify when the backlight for the touch panel automatically goes off after no operation is performed for the set length of time.

1Press the [Utility] key.

2Touch [User’s Choice].

3Touch [3/6], and then touch [LCD Back-light Off].

4Press the [C] key to erase the value.

Use the 10-Key Pad to specify the desired length of time, and then touch [Enter].

(Specify a length of time between 1 and 240 minutes.)

Tip

If the preheat and sleep set- tings are short because of the

LCD Back-light being set to off, then the Backlight will be turned off after the specified preheat or sleep time.

5Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen.

Utility Mode Operations Chapter 5

Di2010/Di2510/Di3010/Di3510

5-17

Page 76
Image 76
Konica Minolta Di2010 user manual To set the LCD Back-light Off function, Tip