Konica Minolta Di2010 user manual Function Combination Table

Appendix Chapter 7

7 7.3 Function Combination Table

Function combination codes

:The functions can be combined.

—:The functions cannot be combined. Later functions cannot be set.

:The function set last has priority. No warning message will appear. The function set first will be cancelled.

:When making double-sided copies from single-sided documents, later functions cannot be set and a warning message appears.

\:This is not a satisfactory combination since the first function is cancelled when other required simultaneous settings are specified. In addition, the other simultaneous settings are required for the setting selected later.

:The function set first has priority. A warning message will appear. Later functions cannot be set.

:The “Auto Size” Zoom setting is selected.

:The “Sort” setting is automatically selected.

:The zoom setting specified using the “Multiple-in-1 and Booklet Copy Zoom” function on the User’s Choice screen is recalled.

:The function selected first is not performed.

:The function selected later is not performed.

:The zoom setting specified using the “Multiple-in-1 and Booklet Copy Zoom” function on the User’s Choice screen is recalled.

:The “2-Point Staple” setting is automatically changed to the “Center Staple” setting. The “Corner Staple” setting cannot be selected.

:These functions cannot be selected if the document is fed through the duplexing document feeder. The function set first has priority. No warning message will appear. The function selected later is not performed.

:These functions cannot be selected if the document is fed through the duplexing document feeder. The function set later has priority. No warning message will appear. The function selected first is not performed.

:The setting changes according to the setting specified from the User’s Choice screen.

:The settings can be specified, but the function selected first is not performed.

:The settings can be specified, but the function selected later is not performed.

:This setting cannot be selected since the “Booklet Creation” setting is not selected.

7-16 Di2010/Di2510/Di3010/Di3510