4.5 “Edge/Frame Erase” Function | 4 |
|
|
To make settings for the “Edge/Frame Erase” function
1Load the document into the duplexing document feeder or position it on the original glass.
2Touch [Auxiliary], and then touch [Edge/Frame Erase].
3Select the desired Edge/Frame Erase setting.
Auxiliary Functions Chapter 4
4Touch 
and 
to specify the width of the erased area, and then touch [Enter].
❍ If [Cancel] is touched, the setting is cancelled.
5Press the [Start] key. The copies are printed.
Di2010/Di2510/Di3010/Di3510 |
