5.3 Changing Default Settings | 5 |
|
|
To set the “Crease/Center Staple” function (Only when the finisher or saddle kit are installed)
When the optional saddle kit (including the finisher) is installed, this controls the offset for creases created using the booklet creation mode, and for any specified center staples.
1Press the [Utility] key.
2Touch [User’s Choice].
3Touch [5/6], and then touch [Crease/Center Staple].
4Touch 
and 
to adjust the setting, and then touch [Enter].
5Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen.
Utility Mode Operations Chapter 5
Di2010/Di2510/Di3010/Di3510 |
