Konica Minolta Di2010 user manual Registering an Image Stamp

Chapter 5

5 5.4 Registering an Image Stamp

4Touch [Input], and then touch desired registration key.

❍To erase a stored image, touch [Delete], and then touch the number from where you wish to delete the image.

❍To check a stored image, touch [Check], and then touch the number where the image that you wish to check is stored.

5Select the size of the image document.

Touch [Enter].

To continue scanning a standard- sized image document, skip to step 9.

❍To scan a non-standard-sized image document, touch [Custom Size].

Utility Mode Operations

6Touch .

Then, touch and to select the length of side X for the image document (between 1 inch and 17 inch).

❍Touch until the cursor moves below the fraction that you wish to change.

7Touch .

Then, touch and to select the length of side Y for the

image document (between 1 inch and 11-11/16 inch).

❍Touch until the cursor moves below the fraction that you wish to change.

8Touch [Enter].

5-32 Di2010/Di2510/Di3010/Di3510