Konica Minolta Di2010 user manual To set the Auto Panel Reset function

Utility Mode Operations Chapter 5

5 5.3 Changing Default Settings

To set the “Auto Panel Reset” function

This function is used to specify when the Basics screen is automatically displayed if no operation is performed while a program or settings are being specified.

1Press the [Utility] key.

2Touch [User’s Choice].

3Touch [3/6], and then touch [Auto Panel Reset].

4Select the desired length of time until the Basics screen is displayed, and then touch [Enter].

❍The length of time until the Basics screen is displayed can be set to 30 seconds, 1, 2, 3 or 5 minutes, or “No Reset”.

5Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen.

5-18 Di2010/Di2510/Di3010/Di3510