Konica Minolta FAX2900/FAX3900 manual IPP Printing, NetWare Server/Client except NDPS

Network Printing in a Windows Environment (Available only with FAX3900)

6

IPP Printing

1Connect the network cable. (“Connecting the Network Cable” on page 2-2)

2Specify the IP address, subnet mask, and default gateway settings for the copier. (“Assigning an IP Address” on page 6-2)

3Print the configuration page and check the settings. (“Printing the Configuration Page” on page 5-7)

4Install the printer driver. Add a network port during the installation of the printer driver.

For details on installing the printer driver, refer to “Installing the Printer Driver” on page 3-1.

NetWare Server/Client (except NDPS)

1Connect the network cable. (“Connecting the Network Cable” on page 2-2)

2Specify the settings that enable the copier to connect to the NetWare server. (“Setting Up the Network Connections” on page 6-12)

3Set up the NetWare client so that it can print via the NetWare server. (“Setting Up the Network Connections” on page 6-12)

NetWare Server/Client (NDPS)

1Connect the network cable. (“Connecting the Network Cable” on page 2-2)

2Specify the IP address, subnet mask, and default gateway settings. (“Assigning an IP Address” on page 6-2)

3Print the configuration page and check the settings. (“Printing the Configuration Page” on page 5-7)

4Specify the settings that enable the copier to connect to the NetWare server. (“Setting Up the Network Connections” on page 6-12)

5Set up the NetWare client so that it can print via the NetWare server. (“Setting Up the Network Connections” on page 6-12)

6-11