The “Found New Hardware Wizard” dialog box appears again.
Repeat steps 4 through 7. Note
This completes the installation of the printer driver.
8
Installing the Printer Driver Using Plug and Play Under Windows 2000
1 With Windows running, insert the CD-ROM into your computer’s CD- ROM drive.
2 Turn on the machine.
3 When the machine is ready, connect it to the computer with the USB cable.
The “Found New Hardware Wizard” dialog box appears.
4 Select Search for a suitable driver for my device (recommended) in the “Install Hardware Device Drivers” dialog box, and then click [Next].
The “Locate Driver Files” dialog box appears.
5 Select Specify a location, and click [Next].
6 Click [Browse...] on the next dialog box, browse to “Driver\(language)\Win2K” on the CD-ROM, and then click [OK].
Tip
Select the language you prefer. For example, if you prefer English, browse to:
Driver\English\Win2K
7 Click [OK], and follow the instructions that appear on the screen until the “Completing the Found New Hardware Wizard” dialog box appears.
Click [Finish].
Installing the Printer Driver
3
