Set the date and time when using the camera for the first time after purchase. Setting is possible from January 1, 1970 to December 31, 2037.
In this example, set the date and time from Janu- ary 1, 1999 (0:00) to September 3, 2000 (10:30).
Note:
*The date and time settings are powered by the backup battery and are not lost when the camera batteries are replaced. The life of the backup battery is about 2 years.
1. Make sure that fully charged batteries are loaded or the AC adapter is connected.
2.Set the mode select dial to SET UP and then press the power button.
The LCD monitor will light
and the setup screen will appear with “Format” selected. (*1)
Notes:*When the power button is pressed for the first time after purchase, step 4 of the date and time setting screen will appear.
*When the power is already turned on with Playback (
) or Photo (
), set the mode select dial to set up (SET UP) to cancel these 2 modes the LCD monitor will light automatically.