*See Release Lock.
Note:
When looking through the viewfinder, the sound of starting the eye start will be heard. However, this is not malfunction. (When the eye start is set to ON.)
5.Gently press the shutter
button farther. When the
○*Never eject the CF card while the card access LED is lit.
Note:
The number displayed in the card status indicator of the data display panel indicates the number of shooting images to be left.
The number of images may vary depending on the CF card remaining space and the images selected by the QUALITY button.
beep sounds, taking of the photograph has been completed. Then, writing of the image to the CF card will start. The sand- glass mark in the data
POWER
*Replace the batteries with new ones when the battery indicator in the data display panel
shows “half” (
).
6.Press the power button.
The lens barrier will close automatically.
display panel will start blinking, indicating the image photographed has been written to the CF card and the card access LED will light amber at the same time.