Konica Minolta Q-M200 manual 40

4.Press the menu button once to enable mode selection (“Set Camera Exposure” setting screen).

The “Set Camera Exposure” icon is highlighted in the upper left corner of the LCD monitor screen, with the through image appearing still.

5.Press the Set/Zoom button once. The exposure adjustment bar will appear at the bottom of the screen. Standard exposure is with the cursor in the center of the bar.

6.Press the select buttons (, ) to adjust the exposure.

*Press the button to set exposure to the minus side and darken the image. Use with colors with low intensity to enhance the effect. *Press the button to set exposure to the plus side and brighten the image. Use to adjust the exposure with backlighting.

7.Press the Set/Zoom button to return to the through image.

The through image will be displayed showing the effects of the exposure compensation.

To change the exposure again, press the menu button, press the Set/Zoom button and repeat steps 6 and 7.

Notes:

*All exposure compensation values will return to the initial settings when the power is turned off and then on again.

*Any differences may be difficult to detect after exposure compensation when the subject is in a dark place.

In such cases, take several photographs with different exposure compensation settings and select the most suitable image by displaying on a TV set or personal computer screen.