4.Press the LCD monitor power button (LCD POWER) to display the image (through image) through the lens.

5.Use the LCD monitor to compose the scene and then lightly press the shutter button halfway. The viewfinder LED will light green and both exposure and focus will be locked.

Caution:

In macro (close-up) photography, the shooting range does not match the field of view visible through the viewfinder.

You are advised not to look through the view- finder in macro (close-up) photography.

Tips: Parallax correction

If you look through the viewfinder with the setup item “eye start” enabled and the LCD monitor

turned off, a parallax warning (*1) will be issued. (The viewfinder LED will blink green rapidly.) The warning can be cleared by turning on the LCD monitor.

*1: A warning alerting you to a difference between the field of view visible through the viewfinder and the shooting range.

6.Now fully press the shutter button.

The beep will sound when the photograph has been taken.

Notes:

*Focusing in macro mode will take more time than in other modes.

*If the macro mode is selected, the flash mode is always off. When you want to use the flash mode, press the flash button. However, the subject may appear overly bright with lighting from the flash.