Error messages
●When “Err” appears on the remaining number of frames display on the Data display panel on the top of the camera and all of the Data display panel marks blink, an error has occurred. In such cases, follow the instructions given below.
1.Press the power button to turn the camera off.
Now press the power button again to turn the power back on. If the functions still do not work:
2.Disconnect the AC adapter, if used.
3.Remove all of the batteries.
4.Load new batteries.
If the error status continues after all of the above have been performed, please con- sult your local dealer.
Contact your local dealer first concerning re- pairs, handling and cleaning.