Preparation

*Turn off the personal computer power supply.

*Turn off the camera power supply and make sure the CF card containing the images has been in- serted. Make sure that either batteries have been loaded or that the AC adapter for Q-M200 (option) has been connected to a power outlet.

1.Use the connecting (interface) cable to connect the camera and personal computer.

Camera: Connect the mini-plug end of the ca- ble to the serial port jack of the camera (refer to the Installation manual).

Personal computer: Personal computers can be equipped with various different types of ca- ble connection jacks. Check the Installation manual concerning the appropriate connector (or adapter) to use.

2.Set the mode select dial on the top of the cam- era to PC connection mode (), used for PC connection.

3.Press the camera power button. “PC” will ap- pear on the data display panel.

When batteries are being used, the battery mark will blink 5 times when the power is turned on. For transferring image files using each software, refer to the section “How to use the software” of the Installation manual.

●Reading directly from the CF card to the personal computer

The Konica CompactFlash Card Adapter (option: CF1-AD1) can be used to read images directly on a personal computer as a PCMCIA Type II compatible ATA card.