*The selftimer is cancelled each time a photograph is taken; therefore, to continue using the selftimer, it is necessary to press the selftimer button again.

*The timer operating time can be set to either 10 sec. (initial setting) or 3 sec. in the setup mode.

Image Quality Mode (QUALITY)

The image quality mode button is used to select any of four qualities of image data for photographs. The currently selected quality can be checked using the data display panel.

1.Set the mode select dial to Photo ().

Note:

*When the power is already turned on with Play-

back () or set up (SET UP), set the mode select dial to Photo () to cancel these two modes and open the lens cover automatically.

2.Press the power button.

The lens cover will open automatically.

3.Press the image quality mode button.

Each time the image qual- ity mode button is pressed, the data display will change as follows.

[FINE] (Initial setting) ②

[SUPER FINE] ①

[ECONOMY] ④

[BASIC] ③